©
American DJ
®
- www.Americandj.com - SP4LED User Manual Page 10
©
American DJ
®
- www.Americandj.com - SP4LED User Manual Page 9
SP4LED Operating Instructions
speed, 99 the fastest speed.
DMX Mode:
Operating through a DMX controller gives the user the freedom to cre-
ate their own programs tailored to their own individual needs. This func-
tion also allows you to use your fixtures as spot lights. The SP4LED has
3 DMX Channel modes: 3 Channel mode, 5 Channel mode, and a 7
Channel mode. See pages 12-14 for each modes’ DMX traits.
1. This function will allow you to control each individual fixture’s traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode, plug in the fixture via the XLR con-
nections to any standard DMX controller. Select your desired DMX
channel mode, and then press the UP or DOWN buttons to adjust the
DMX address.
3. To select your desired DMX channel mode, press the MODE button
until d-PX is displayed. “X” represents the displayed channel mode.
• To run the 3 Channel Mode, press the UP or DOWN buttons until
“d-P1” is displayed. This is the DMX addressing for the 3 Channel
Mode.
• To run the 5 Channel Mode, press the UP or DOWN buttons until
“d-P2” is displayed. This is the DMX addressing for the 5 Channel
Mode.
• To run the 7 Channel Mode, press the UP or DOWN buttons until
“d-P3” is displayed. This is the DMX addressing for the 7 Channel
Mode.
4. Please see pages 12-14 for DMX values and traits.
Infrared Receiver:
This function is used to activate and deactivate the infrared receiver.
When this function is activated you can control the SP4LED using the
ADJ LED RC (Remote Control). Please see the user manual for con-
trols and functions.
1. Plug the fixture in and press the MODE button until “AUTO” is dis-
played.
2. Press the SET UP button until “IrXX” is displayed. “XX” represents
either “on” or “oF”.
3. Press the UP or DOWN buttons to either activate the remote
function (On) or deactivate it (Off).
The
ADJ LED RC
infrared remote
(sold seperately) has many dif-
fernet functions and gives you complete control of your Flat Par Tri7.
To control the your desired fixture you must aim the controller at the
front of the fixture and be no more the 30 feet away. To use the ADJ
LED RC you must first activate the fixtures infrared receiver, to acti-
vate the receiver please see the instructions on page 9.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button will run an automatic program. You can
control the speed of the Auto Run by pressing the SPEED button first
and then pressing the “+” and “-” buttons.
PROGRAM SELECTION
-
This button will let you access the units
built-in programs. Press this button and then press the “+” or “-” to
navigate through the built-in programs. You can control the speed of
the program by pressing the SPEED button and then pressing the “+”
and “-” buttons. When in Program 1, pressing the SPEED button will
let select 1 of 15 output channel combinations. Use the “+” and “-”
buttons scroll through the different combinations.
FLASH
-
This button will not work with the SP4LED.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the
speed of the Auto run.
DMX MODE -
This button will let you select which DMX mode you
want to use. Some fixtures will come with different DMX channel
modes. This button will switch between the different modes. Please
see pages 13-17 for DMX modes, values, and traits.
SOUND ACTIVE -
This button activates sound active mode. Use the
“+” and “-” buttons to adjust the sound sensitivity.
SLAVE -
This designates the fixture as a slave fixture in a master/
slave configuration.
SET ADDRESS -
Press this button to set the DMX address. Press
this button first, then press the numbers to set the address.
Example: Set DMX Address 1 Press “S-0-0-1”
Set DMX Address 245 Press “S-2-4-5”
1/2/3/4 -
Press the 1/2/3/4 buttons to choose either of the four output
channels and then press the “+” or “-” to adjust the intensity. 1 is for
SP4LED ADJ LED RC Operating Instructions
