ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 13
ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 12
Ricochet
System Menu
Fixture Temp
- With this function you can display the
running temperature of the unit.
1. Press the MENU button until “Fixture Temp” is displayed,
press ENTER.
2. The current running temperature of the unit will now be dis-
played. Press the MENU button to exit.
Fixture Time
- With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The running time of the unit will now be displayed. Press the
MENU button to exit.
Firmware Version
- This will display the software
version
1. Press the MENU button until “Firmware Version” is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to exit.
Reset
- This function will reset the unit.
1. Press the MENU button until “Reset” is displayed. Press the
ENTER button and the unit will reset itself.
Ricochet
Offset Menu
To enter the offset adjustment submenu, press the ENTER button for
at least 5 seconds. In this submenu you are able to adjust the original
position of the pan, tilt, gobo wheel, and color wheel.
Pan Offset
- Adjustment of the Pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “Pan Offset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Tilt Offset
- Adjustment of the Tilt position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “Tilt Offset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Color Offset
- Adjustment of the color wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “Color Offset” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
