On-Board System Menu.
The Ricochet comes with an easy to navi-
gate system menu. This next section will detail the functions of each
command in the system menu. Please read the next section thor-
oughly!
To access the main menu press the MENU button. Press the UP or
DOWN buttons until you reach function you wish to change. When you
reach the function you wish to change press the ENTER button. When
a function is selected use the UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to confirm and lock the change into the system memory. If the MENU
button is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To
exit without making any changes press the MENU button.
Ricochet
System Menu
Ricochet
System Menu
DMX Address
-
This will let you set your desired DMX
address.
1. Press the MENU button until “DMX Address” is displayed,
press ENTER.
2. The current DMX address will be displayed. Press the UP or
DOWN buttons to find your desired address.
3. Press ENTER to confirm, then connect your DMX controller.
Channel Mode
- This will let you select your desired
DMX Channel mode.
1. Press the MENU button until “Channel Mode” is displayed,
press ENTER.
2. “X Chan” will now be displayed, “X” represents the displayed
DMX channel mode. Press the UP or DOWN buttons to find your
desired Channel mode.
3. Press ENTER to confirm.
Slave Mode -
This will let you set unit as a master or
a slave in a master/slave configuration.
1. Press the MENU button until “Slave Mode” is displayed,
press ENTER. Either “Master”, “Slave 1”, “Slave 2” will be
displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
Show Mode -
Show modes 0-7 (Factory programs).
Show mode can run with or without sound active mode
active.
1. Press the MENU button until “
Show Mode
” is displayed, press
ENTER.
2. “
Show X
” will now be displayed, “
X
” representing a number
between 0-7. Show’s 1-7 are factory set shows, while “Show 0”
is random show mode. Use the UP or DOWN buttons to find your
desired show.
3. When you have found your desired show press ENTER, then
press and hold the MENU button for at least 3 seconds to acti-
vate. After you have set your desired show, it can be changed at
any time using the UP or DOWN buttons.
Sound Mode
- In this mode the unit will run in sound
active mode.
1. Press the MENU button until “Sound Mode” is displayed,
press ENTER.
2. Either “On” or “Off” will now be displayed. Use the UP or
DOWN buttons to toggle between “On” and “Off”.
3. Press ENTER to confirm your selection, the press and hold the
MENU button to activate.
ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 8
ADJ Products, LLC - www.adj.com - Ricochet Instruction Manual Page 9
