manualshive.com logo in svg

ADJ PIXEL KLING 10C, User Instructions, Page: 13 / 14

Share
Download
ADJ PIXEL KLING 10C User Instructions Download Page 13

ADJ Products, LLC  -  www.adj.com  - Pixel Kling 10C User Manual Page 12

  Pixel Kling 10C                              ADJ LED RC1 Operation

The 

ADJ LED RC1 

infrared remote

 

(sold seperately) has many dif-

fernet functions and gives you complete control of your Pixel Kling 

10C. To control the your desired fixture you must aim the controller 

at the front of the fixture and be no more the 30 feet away. To use the 

ADJ LED RC1 you must first activate the fixtures infrared receiver, to 

activate the receiver please see the instructions on pages 10-11.

BLACKOUT

 

-

 Pressing this button will blackout the fixture.

AUTO RUN - 

Press this button to switch between the Color Change 

mode, Color Fade mode, and Auto Run. Use the “+” and “-” buttons 

to scroll through the 24 programs of each mode. You can control the 

speed of the modes by pressing the SPEED button first and then 

pressing the “+” and “-” buttons.

 

PROGRAM SELECTION

 

-

 This button activates static color mode 

and lets you select which tube to control. See Static Color mode for 

information on selecting the LED Pixel Tube. Use the “+” and “-” but-

tons to scroll through the 7 static colors and to scroll through the LED 

Pixel tubes. Press the Flash button to activate strobing and use the 

“+” and “-” buttons to adjust the strobe speed.

SOUND ACTIVE

 

-

 This button activates sound active mode. Use 

the “+” and “-” buttons to scroll through the 24 sound active modes. 

Press this button again to switch to sound sensitivity adjustment and 

use the “+” and “-” buttons to adjust the sound sensitivity. 

FLASH

 

-

 This button will activate the strobe effect. You can control 

the flash rate by pressing the “+” and “-” buttons. Press this button 

again to exit strobe mode.

SPEED

 

-

 Press this button to activate and use the “+” & “-” buttons 

to adjust the speed of color fade and color change mode, color fade 

mode, color change mode, and the sound sensitivity level.

DMX MODE -

 This button will let you select which DMX mode you 

want to use. Use the “+” and “-” buttons to scroll through the DMX 

channel modes. Some fixtures will come with different DMX channel 

modes. This button will switch between the different modes. Please 

see pages 15-22 for DMX modes, values, and traits.

ADJ Products, LLC  -  www.adj.com  - Pixel Kling 10C User Manual Page 15

  Channel   Value  

                   Function

       

1                                                         RED

                        0 - 255                          0% - 100%           

       2                                                       GREEN

        

                                                                               

                 

                        0 - 255                          0% - 100%

       3                                                         BLUE

                        0 - 255                          0% - 100%

       4                                              MASTER DIMMER

                        0 - 255                          0% - 100%

       5                                    SOUND ACTIVITY/STROBING

                           0                             NO FUNCTION

                        1 - 5                          SOUND ACTIVE

                        6 - 10                         NO FUNCTION

                      11 - 255             STROBING SLOW - FAST

  Pixel Kling 10C         5 Channel - DMX Values & Functions

Summary of Contents for PIXEL KLING 10C















Reviews:

No comments