ADJ Products, LLC - www.adj.com - Par Z4 Instruction Manual Page 15
ADJ Products, LLC - www.adj.com - Par Z4 Instruction Manual Page 14
2. The fixture will now run a self test.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until “
TEMP
” is displayed, press
ENTER.
2. The fixture temperature will now be displayed. Press MENU
to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until “
VER
” is displayed,
press ENTER.
2. The display will show the software version.
Par Z4
System Menu
Universal DMX Control:
This function allows you to use a uni-
versal DMX-512 controller to control the colors, master dimmer and
strobe. A DMX controller allows you to create unique programs tai-
lored to your individual needs.
1. The Par Z4 has 4 DMX channel modes; 4 channel mode, 6 chan-
nel mode, 8 channel mode, and 9 channel mode. See pages
18-20 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 7-9 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 9 to select your DMX channel
mode and set your desired DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “
SOUN
” is displayed, and press
ENTER. Press the UP or DOWN buttons so that “
ON
” is dis-
played and press ENTER.
2. Press the MENU button until “
SENS
” is displayed, and press
ENTER. Use the UP and DOWN buttons to adjust the sound
sensitivity. Press ENTER when you have found your desired sensi-
tivity level.
Show Mode:
This mode allows either a single unit or several units
linked together, to run either a show mode, fade mode, static color, or
RGBW dimmer mode.
1. Press the MENU button until “
SHND
” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons to find your desired setting.
Follow the instructions on page 10 for the individual shows and
settings.
Par Z4
Operation
