ADJ PAR Z4, User Instruction

Page: 6 / 14

ADJ Products, LLC - www.adj.com - Par Z4 Instruction Manual Page 10
ADJ Products, LLC - www.adj.com - Par Z4 Instruction Manual Page 11
SENS -
In this mode you can adjust the sound sensitiv-
ity.
1. Press the MENU button until “ SENS ” is displayed, press
ENTER.
2. A number between 0-100 will be displayed. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least
sensitive, and 100 being the most sensitive.
3. When you have found your desired setting press ENTER to
confirm.
DNST
- This mode can be used as a precaution mode,
that in case the DMX signal is lost, interrupted, or power is
lost, the operating mode chosen in the setup is the running
mode the fixture will go into when the DMX signal is lost. You
can also set this as the operating mode you would like the
unit to return to when power is applied.
1. Press the MENU button until “
DNST ” is displayed, and either
“ MASL ”, “ BLND ”, or “ LAST ” will be displayed beneath.
2. Press ENTER and the bottom choice will begin to flash. Use
the UP or DOWN buttons to choose an operating mode you
would like the unit to start up in when power is applied or the
DMX signal is lost.
•
MASL (Master Slave) - If the DMX signal is lost or power is
applied, the unit will automatically go into Master Slave mode
and run a built-in show.
•
BLND (Blackout) - If the DMX signal is lost or interrupted, the
unit will automatically go into stand by mode.
•
LAST - If the DMX signal is lost the fixture will stay in the last
DMX setting. If power is applied and this mode is set, the unit will
automatically go into the last DMX set up.
Par Z4 System Menu
SHND -
In this mode you can run a show mode, fade
show, static color mode, or RGBW dimmer mode.
1. Press the MENU button until “ SHND ” is displayed, press
ENTER.
2. Either “
Sh 0 ”, “ Colo ”, or “ Fade ” will now be displayed. Use
the UP or DOWN buttons to find your desired show mode.
3. Select “
Sh 0 ” and press ENTER. The unit will now run a random
show.
4. Select “
Fade ” and press ENTER. Use the UP and DOWN but-
tons to adjust the fade speed.
5. Select “
Colo ” and press ENTER. “ Col X ” will be displayed. “X”
is current static color number displayed. Use the UP and DOWN
buttons to find your desired color.
6. If you select “
Co 10 ” this is RGBW dimmer mode. Press the
ENTER button and “Red” will be displayed. Press ENTER and
you are now able to use the UP or DOWN buttons to adjust the
output intensity. Press ENTER to save the set output intensity for
RED. Press the UP or DOWN buttons to move to the next color
and press ENTER to enter the output intensity setting for that
color.
7. When you have found your desired setting, press and hold
the MENU button for at least 3 seconds to activate.
SOUN -
Sound Active mode.
1. Press the MENU button until “ SOUN ” is displayed, press
ENTER.
2. The display will show either “
ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to activate sound active mode,
or “ OFF ” to deactivate sound active mode.
3. Press ENTER to confirm.
Par Z4 System Menu