11
SYSTEM MENU
DMX 512 Address Setting
Press the either the
MENU
,
UP
, or
DOWN
buttons until
is displayed, press
ENTER
.
The current address will now be displayed and flashing. Press the
UP
or
DOWN
buttons to select your
desired address.
Press
ENTER
to confirm and exit.
Channel Mode – Select your desired DMX channel mode.
Press the
MENU
button until
is displayed and press
ENTER
. The current DMX channel mode
will be displayed.
Press the
UP
or
DOWN
buttons to find your desired DMX channel mode and
press
ENTER
to confirm
and exit.
DMX State -
This mode can be used as a precaution mode. In the event that the DMX
signal is lost, interrupted, or power is lost, the operating mode chosen in the setup is the
running mode the fixture will go into when the DMX signal is lost. You can also set this as the
operating mode you would like the unit to return to when power is applied.
Press the
MENU
button until
is displayed and press
ENTER
.
Use the
DOWN
and
UP
button to
select (Blackout) /or
(Automatic Operation Color Macro) or
(Hold the last state).
Press
ENTER
and the bottom choice will begin to flash. Use the
UP
or
DOWN
buttons to choose an operating
mode you would like the unit to start up in when power is applied or the DMX signal is lost.
•
BLND
(Blackout) - If the DMX signal is lost or interrupted, the unit will automatically go into standby
mode.
•
HOLD
- If the DMX signal is lost the fixture will stay in the last DMX setting. If power is applied and
this mode is set, the unit will automatically go into the last DMX set up.
Press
ENTER
to confirm and exit.
