Ninja 5RX 13 Channel Mode
Channel Value
Function
10 CENTER CONE MIRROR
0 - 127 RANDOM ROLL
128 - 189 FAST - SLOW
190 - 192 STOP
193 - 255 SLOW - FAST
11 SHUTTER/STROBING
0 - 7 CLOSE
8 - 15 OPEN
16 - 131 STROBING SLOW - FAST
132 - 139 OPEN
140 - 181 FAST CLOSE - SLOW OPEN
182 - 189 OPEN
190 - 231 FAST OPEN - SLOW CLOSE
232 - 239 OPEN
240 - 247 RANDOM STROBE
248 - 255 OPEN
12 0 - 255 MASTER DIMMER 0% - 100%
13 SPECIAL FUNCTIONS
0 - 69 NOTHING
70 - 79 ENABLE BLACKOUT WITH TILTING
80 - 89 NOTHING
90 - 99 ENABLE BLACKOUT WITH COLOR
CHANGE
100 - 109 NOTHING
110 - 119 ENABLE BLACKOUT WITH GOBO
CHANGE
120 - 129 NOTHING
130 - 139 ENABLE BLACKOUT WITH ROLL
CHANGE
140 - 199 NOTHING
200 - 209 RESET ALL
210 - 255 NOTHING
ADJ Products - www.adj.com - Ninja 5RX Instruction Manual Page 28
Ninja 5RX Lamp Replacement
Locate the lamp access door
on the rear of the unit. Remove
the 4 phillips screws that hold
the access door in place.
Remove the access door to
access the lamp. Remove all
wires attached to the base of
the lamp.
To remove the lamp, gently slide the lamp to the right to release
it. Once the lamp is released, grab the base with your thumb
and index finger and gently pull the lamp out towards the left
and away from the fixture. Insert the new lamp in reverse order.
ADJ Products - www.adj.com - Ninja 5RX Instruction Manual Page 29
