ADJ Products, LLC - www.adj.com - Monster Quad Instruction Manual Page 12
ADJ Products, LLC - www.adj.com - Monster Quad Instruction Manual Page 13
• Blackout - If the DMX signal is lost or power is lost then applied,
the unit will automatically go into stand by mode.
• Last State - If the DMX signal is lost or power is lost then
applied, the fixture will stay in the last DMX set up. If power is
applied and this mode is set, the unit will automatically go into
the last DMX set up.
• Master Slave - If the DMX signal is lost or power is lost then
applied, the unit will automatically go into Master/Slave mode.
3. Press ENTER to confirm your desired set up.
Back Light
- With this function you can make the LCD
backlight automatically turn off after two minutes.
1. Press the MENU button until “Back Light” is displayed, press
ENTER.
2. Either “On” or “Off” will now be displayed. Press the UP or
DOWN buttons to select “On” to keep the backlight on at all
times, or “Off” to allow the backlight to turn off after 2 minutes.
Press any button to turn the backlight on again.
3. Press ENTER to confirm.
Auto Test
- This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
Fixture Time
- With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The running time of the fixture will now be displayed. Press
Monster Quad
System Menu
MENU to exit.
Firmware Version
- This will display the software ver-
sion
1. Press the MENU button until “Firmware Version” is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.
Monster Quad
System Menu
Monster Quad IR Control
The optional UC-IR infrared remote (sold separately) has many dif-
fernet functions and gives you complete control of your Monster Fun.
To control the your desired fixture you must aim the controller at the
front of the fixture and be no more the 30 feet away.
STAND BY
-
Pressing this button will blackout the fixture.
FULL ON
-
This button will not function with this fixture.
FADE/GOBO
-
When sound mode is off, this button will make the fix-
ture fade from one color to the other.
COLOR
-
Press this button to activate color mode. Use buttons 1-9
to select your desired color.
STROBE
-
Press and hold this button for at least 3 seconds to acti-
vate random strobe. Press this button quickly to activate sound ac-
tive strobe.
SPEED
-
Invalid for this fixture.
SOUND ON & OFF -
These buttons activate and deactivate the
sound active mode.
SHOW -
Press this button to activate show mode. Use buttons 1-9 to
select your desired show. Show 0 is activates all shows.
“” and “DIMMER -” -
These buttons are are not used for
this fixture.
