A.D.J. Supply Europe B.V. – www.americandj.eu – Mega Tri BAR
Instruction Manual Page 6
OPERATING INSTRUCTIONS
LED Display On/Off:
To make the display stay ON all of the time press the MODE and UP
buttons at the same time. To make the display turn OFF after 20 seconds, press the MODE and
DOWN buttons at the same time.
Operating Modes:
Dimmer Mode:
In this mode you can adjust RGB colors to make your desired color.
1. Plug the fixture in and press the MODE button until “CoLr” is displayed.
2. Press the SET UP button to enter the RGB mode. Adjust the RGB colors using the UP and
DOWN buttons. Press SET UP to move on to the next color in the RGB mode.
Program Mode:
In this mode you can run 1 of 14 built-in programs.
1. Plug the fixture in and press the MODE button until “Pr.XX” is displayed, “XX” = 01-14.
2. Press the UP or DOWN buttons to find your desired and program and press SETUP. The
programs and controls are listed below.
• Pr.01 is static color program. There are 7 colors to choose from. Press the SET UP button to
enter the static color submenu. Use the UP or DOWN buttons to scroll through the static colors.
• Pr.02 - Pr.12 are programs where the programs speed or fade time can be adjusted. Both
modes cannot work at the same time.
Note:
You must have Program speed set to the lowest speed if you want to run the fade mode.
Select your desired program and press the SET UP button.
“SP.XX” will be displayed, this is the program speed. You can ad- just the speed from 01-99. 01
being the slowest, and 99 being the fastest.
Press SET UP again, and “FD.XX” will be displayed, this is the fade time. You can adjust the fade
time from 01-99. 01 being the slow est, and 99 being the fastest.
• Pr.13 - Pr.14 are programs where the program speed or fade time can be adjusted, and also the
color(s) can be selected.
Select your desired program and press the SET UP button.
“SP.XX” will be displayed, this is the program speed. You can adjust the speed from 01-99. 01
being the slowest, and 99 being the fastest.
- Press the SET UP button again to adjust the Fade speed.
“FD.XX” will be displayed, this is the fade time. You can adjust the fade time from 01-99. 01 being
the slowest, and 99 being the fast- est. Press the SET UP button to enter one of two color adjust-
ment modes. Use the UP or DOWN buttons to scroll through the different color selections. You
can also press the SET UP button again to enter another color adjustment mode.
-
Press the SET UP button to choose your color(s). The first set of colors are controlled by the
program speed. When you press SET UP again you will find a second set of colors, these are
controlled by the fade speed. One set of colors must be set to off for the your chosen program to
work.
Example: if your running the first set of colors (program speed) then the second set of colors
(fade program) must be set to off.
Auto Mode:
1. Plug the fixture in and press the MODE button until “AUTO” is displayed. A factory program will
now run. The run (loop) of the pro- gram can be adjusted by pressing SET UP and then using the
UP and DOWN buttons to adjust the loop amount.
Example: If “n.003” is set for the loop, the unit will run each program 3 times.
Sound Active Mode:
In this mode the Mega Tri Bar™ will react to sound, changing and fading through the different
colors.
