ADJ Products, LLC — www.adj.com — Mega QA Go - User Manual — Page
11
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade, Color Change, and both modes
running together. The running speed is adjustable in all 3 modes.
1.
Plug the fixture in and press the MODE button until either “AFXX”, “AJXX”, or “A-JF” is displayed.
•
AFXX = Color Fade mode, there are 16 Color Fade modes to choose from. Use the UP or
DOWN buttons to scroll through the different Auto Fade modes.
•
AJXX = Color Change mode, there are 16 Color Change modes to choose from. Use the UP or
DOWN buttons to scroll through the different Auto Change modes.
•
A-JF = Both Color Fade and Color Change modes running.
2.
After you have chosen your desired running mode press the SET UP button until “SP.XX” is displayed.
When this is displayed you can adjust the running speed of your desired program. Use the UP or
DOWN button to adjust the speed between “SP.01” (slow- est) and “SP.16” (fastest). Once you have
set your desired running speed, press the SET UP button to return to your desired Auto Run Mode.
Static Color Mode:
1.
Plug the fixture in and press the MODE button until “CLXX” is dis- played.
2.
There are 64 colors to choose from. Select your desired color by pressing the UP and DOWN
buttons. After you have selected your desired color you can activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
3.
“FS.XX” will be displayed, this is Flash mode. The Flash can be adjusted between “FS.00” (flash
off) to “FS.15” (fastest flash).
DMX State:
This mode can be used as a precaution mode, that in case the DMX signal is lost, the operating mode
chosen in the setup is the running mode the fixture will go into when the DMX signal is lost. You can
also set this as the operating mode you would like the unit to return to when
power is applied.
1.
Plug the fixture in and press the MODE button until “d.XXX” is displayed. “XXX” represents the
current displayed DMX address.
2.
Press the SET UP button so that “nodn” is displayed. Use the UP and DOWN buttons to scroll
through the DMX states.
•
“bLAC” (Blackout) - If the DMX signal is lost or interrupted, the unit will automatically go into
stand by mode.
•
“LASt” (Last State) - If the DMX signal is lost or interrupted, the fixture will stay in the last DMX set
up. If power is applied and this mode is set, the unit will automatically go into the last DMX set up.
•
“ProG” (Auto Run) - If the DMX signal is lost or interrupted, the unit will automatically go into Auto
Run mode.
3.
After you have found your desired setting, press SET UP to exit.
Mega QA Go
Operating Instructions