ADJ Mega GO Par64 PLUS User Instructions Download Page 16

ADJ Products, LLC  -  www.adj.com  - Mega GO Par64 PLUS User Manual Page 30

  Mega GO Par64 PLUS                             Trouble Shooting

Listed below are a few common problems the user may encounter, 

with solutions.
Unit not responding to DMX:

1.  Check that the DMX cables are connected properly and are    

  wired correctly (pin 3 is “hot”; on some other DMX devices    

  pin 2 may be ‘hot’). Also, check that all cables are connected   

  to the right connectors; it does matter which way the inputs    

  and outputs are connected.
Unit does not respond to sound:

1.  Quiet or high pitched sounds will not activate the unit.

2.  Make sure that Sound Active mode is activated.

  Mega GO Par64 PLUS                                          Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light 

output.  

1.   Use normal glass cleaner and a soft cloth to wipe down the 

  outside casing.

2.   Clean the external optics with glass cleaner and a soft cloth 

  every 20 days.

3.  Always be sure to dry all parts completely before plugging 

  the unit back in.

Cleaning frequency depends on the environment in which the fixture 

operates (i.e. smoke, fog residue, dust, dew). 

Disconnect the unit from its power source. Remove the power cord 

from the unit. Once the cord has been removed, you will find that the 

fuse holder is located inside the power socket. Insert a flat-head screw 

driver into the power socket and gently pry out the fuse holder. Remove 

the bad fuse and replace with a new one. The fuse holder also has a 

holder for a spare fuse.

  Mega GO Par64 PLUS                           Fuse Replacement

With  this  feature  you  can  connect  the  fixtures  to  one  another 

using the IEC input and output sockets. The quantity that can be 

connected is 25 fixtures maximum. After 25 fixtures you will need 

to use a new power outlet. They must be the same fixtures. DO 

NOT mix fixtures.

  Mega GO Par64 PLUS                  Power Cord Daisy Chain

  Mega GO Par64 PLUS                        Dimmer Curve Chart

(Fade Time)

(Fade Time)

Ramp Effect

Standard

Stage

TV

Architectural

Theatre

  Mega GO Par64 PLUS                           Photometric Chart

ADJ Products, LLC  -  www.adj.com  - Mega GO Par64 PLUS User Manual Page 31

Summary of Contents for Mega GO Par64 PLUS



















Reviews: