ADJ Products, LLC - www.adj.com - Mega Bar 50RGB RC User Manual Page 12
The ADJ LED RC infrared remote has many different functions and gives you complete control of
your Mega Bar 50RGB RC. To control the your desired fixture you must aim the controller at the
front of the fixture and within the maximum range of 30 feet. In order to use the ADJ LED RC, you
must first activate the fixture’s infrared receiver by following the directions shown in the Operating
Instructions section of this manual.
BLACKOUT - Pressing this button will blackout the fixture.
AUTO RUN - Pressing this button will run an automatic program. You can control the speed by
pressing the SPEED button first and then pressing the “+” and “-” buttons.
PROGRAM SELECTION - This button will let you access the units built-in programs. Press this but-
ton and then press the “+” or “-” to scroll through the built-in programs.
FLASH - This button will activate the strobe effect. You can adjust the flash rate by pressing the “+”
and “-” buttons. Press this button again to exit strobe mode.
SPEED - Press this button and use the “+” and “-” buttons to adjust the speed of the Auto run.
DMX MODE - This button will let you select which DMX mode you want to use. Some fixtures will
come with different DMX channel modes. Pressing this button will scroll through the different modes.
Please see the DMX Values & Traits sections of this manual for DMX modes, values, and traits.
SOUND ACTIVE - Press this button to activate sound active mode. Use the “+” and “-” buttons to
adjust the sound sensitivity.
SECD - This designates the fixture as a secondary fixture in a primary/secondary configuration.
SET ADDRESS - Press this button to set the DMX address. Press this button first, then press the
numbers to set the address. For example, to set a DMX Address of 1, press “S001”.
R G B - Press any one of these buttons to a select a color, and then press the “+” or “-” to adjust the
brightness for the selected color.
“+” and “-” - Use these buttons to adjust the flash rate, speed of the Auto Run, sound sensitivity,
and program selection.
Mega Bar 50RGB RC
ADJ LED RC Operation
