ADJ MDF2PSUX156 Safety Manual Download Page 4

4

Unpacking: Thank you for purchasing the MDF2PSUX156 power supply for the MDF2 dance floor 

system by ADJ Products, LLC. Every device has been thoroughly tested and has been shipped in 

perfect operating condition. Carefully check the shipping carton for damage that may have occurred 

during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage and 

be sure all accessories necessary to operate the unit have arrived intact. In the event that damage 

has been found or parts are missing, please contact our toll free customer support number for further 

instructions. Do not return this unit to your dealer without first contacting customer support.

Introduction: The ADJ MDF2PSUX156 is a power supply unit intended for use with the ADJ MDF2 

dance floor panels. To optimize the performance of this product, please read these instructions care-

fully to familiarize yourself with the basic operations of this unit. These instructions contain important 

safety information regarding the use and maintenance of this unit. Please keep this manual with the 

unit for future reference.

 

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit 

forums.adj.com

 with questions, comments or suggestions.

Parts: To purchase parts online visit: 

http://parts.adj.com  

(US)

http://www.adjparts.eu  

(EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA 

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 | 

www.adj.com

 | 

[email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99 

www.americandj.eu

 | 

[email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, 

as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, 

please contact ADJ Products, LLC.
Do not discard the shipping carton in the trash. Please recycle when ever possible.

INTRODUCTION

Summary of Contents for MDF2PSUX156















Reviews: