ADJ MDF2PSUX156, Safety Manual, Page: 10 / 14

INSTALLATION
10
CONNECTIONS
The MDF2PSUX156 features two Power Switches and two Power In connections. The Power 1
switch and port control outlets 1-6, and the Power 2 switch and port control outlets 7-12.
Each of the twelve (12) Power Out connections should be linked via a power cable to a single Power
Ramp from the MDF2 system. When used in conjunction with the MDF2PSUX156 power supply,
each Power Ramp is able to support a single row of up to thirteen (13) dance floor panels, for a total
of 156 dance floor panels.
When installing the dance floor panels in place, pay close attention to the directional orientation
arrows located on the side faces of each panel. When placed correctly, these arrows should indicate
the direction of power flow from the Power Ramp to the first panel, then to each subsequent panel
down the line. These panels must be positioned in a straight line to receive and transit power. If the
panel is rotated 90 degrees, or if the panel is placed with the directional arrow pointing back
towards the power source, the panel will not receive power or be able to transmit power to
any subsequent panels down the line. Please see the illustration below.
NOTE: Directional orientation arrows are depicted on the top surface of the panels for the sake of
clarity. Actual panels will have directional orientation arrows located on the sides of the panels.