ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 9
ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 8
The Inno Pocket Spot LZR is fully operational in three different
mounting positions; hanging upside-down from a ceiling, mounted
sideways to trussing, or set on a flat level surface. Be sure this fixture
is kept at least 3m away from any flammable materials (decoration
etc.). Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the
clamp fails (see next page).
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualifications, do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
Inno Pocket Spot LZR Mounting
Screw one clamp via a M12 screw and nut to the included
bracket. Attach the bracket using the included screws to the
bottom of the Inno Pocket Spot LZR. Attach the eyehole screw
to the bottom of the base and pull the safety-cable through
the screw and over the trussing system or a safe fixation spot.
Insert the end in the carabine and tighten the safety screw.
NOTICE:
The suitable enviromental temperature for this light-
ing fixture is between -25˚ C to 45˚ C. Do not place this lighting
fixture in an enviroment where the temperatures are under or
above the temperatures stated above. This will allow the fixture
to run at its best and help prolong the fixture life.
Inno Pocket Spot LZR Mounting
