ADJ Inno Pocket Spot LZR, User Instructions

Page: 10 / 20

ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 18 ADJ Products, LLC - www.adj.com - Inno Pocket Spot LZR Instruction Manual Page 19
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until “ VER ” is displayed, press
ENTER.
2. The display will show the software version.
RSET
- Use this function to reset the unit.
1. Press the MENU button until “ RSET ” is displayed, press ENTER.
2. The fixture will now reset.
Inno Pocket Spot LZR System Menu
Inno Pocket Spot L Home Adjustment Menu
To enter the home position adjustment menu, press the ENTER
button for at least 5 seconds. In this submenu you are able to adjust
the original position of the pan position, tilt position, color wheel posi-
tion, and gobo wheel position.
PAN
- Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “ PAN ” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “ LED ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at all
times, or “ OFF ” to switch to have the LED display switch off after 10
seconds.
3. Press ENTER to confirm. To make you LED display reappear again
press any button.
DISP -
This function will reverse the display 180º.
1. Press the MENU button until “ DISP ” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it again.
Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program.
1. Press the MENU button until “ TEST ” is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- This function will show you current running tem-
perature.
1. Press the MENU button until “ TEST ” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
Inno Pocket Spot LZR System Menu