ADJ H20 DMX IR, User Instructions

Page: 6 / 10

ADJ Products, LLC - www.adj.com - H2O DMX IR Instruction Manual Page 11
Back Light
- With this function the display back light
will turn off after 2 minutes.
1. Press the MENU button until “ Back Light ” is displayed, press
ENTER.
2. Either “
ON ” or “ OFF ” will now be displayed. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at all
times, or “ OFF ” to allow the LED display to turn off after 2 min-
utes. Press any button to turn on the LED display again.
3. Press ENTER, and then press and hold the MENU button
for at
least three seconds
to confirm.
Manual Test
- This function will let you manually test
the color wheel, water wave, and dimmer. In this function
you can also manually adjust and set the color wheel, rota-
tion speed, and dimmer.
1. Press the MENU button until “ Manual Test ” is displayed,
press ENTER.
2. Use the UP or DOWN buttons to scroll between “
Color ”,
“ Water ”, or “ Dimmer ”. Select the function you would like to
test and press ENTER.
3. Use the UP or DOWN buttons to adjust the values to test/
check the function. Press the MENU button after testing the
functions.
4. You can also make your settings to your desire and stay in
the mode, do not exit this mode, and your settings will stay as
you have made them.
Auto Test
- This function will run a self test program.
1. Press the MENU button until “ Auto Test ” is displayed, press
ENTER.
ADJ Products, LLC - www.adj.com - H2O DMX IR Instruction Manual Page 10
H2O DMX IR System Menu
2. The fixture will now run a self test. Press the MENU button to
exit.
Fixture Temp.
- With this function you can display the
fixture temperature.
1. Press the MENU button until “Fixture Temp.” is displayed,
press ENTER.
2. The fixture temperature will now be displayed. Press the
MENU button to exit.
Fixture Hours
- With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Hours” is displayed,
press ENTER.
2. The running time of the fixture will now be displayed. Press
the MENU button to exit.
Firmware Version
- This will display the software
version
1. Press the MENU button until “ Firmware Version ” is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to exit.
Reset
- This function will reset the unit.
1. Press the MENU button until “ Reset ” is displayed. Press the
ENTER button and the unit will reset itself.
H2O DMX IR System Menu