Flat Par QA12XS Operating Instructions
ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 7
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE but-
ton until “dxx” is displayed.
“XX” represents either “on” or “oFF”.
Press
the UP or DONW buttons so that “doff” is displayed. Now the display will
disappear after 10s. Press any button to turn the display on again. Be
advised though that the display will turn off automatically after 10 sec-
onds.
“don” = LED display on at all times.
“doFF” = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display can
be read upside down.
1. Plug the fixture in and press the MODE button until “dXX” is dis-
played. “XX” represents either “on” or “oFF”.
2. Press the SET UP button until “Stnd” is displayed.
3. Press the UP or DOWN buttons to “flip” the display 180°.
Operating Modes:
The Flat Par QA12XS has five operating modes:
• Sound-Active mode - The unit will react to sound.
• Static Color Mode - Choose 1 of 15 colors to remain static.
• Auto Mode - There are 3 different Auto Modes to choose from.
• RGBA Mode -
Choose one of the four colors to remain static or
adjust the intensity of each color to make your own color.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.
Sound Active Mode:
In this mode the Flat Par QA12XS will react to sound. There are 16
sound active programs to choose from. The sound sensitivity can also
be adjusted.
1. Plug the fixture in and press the MODE button until “SOXX” is dis-
played. “XX” represents the sound active mode (1-16) currently dis-
played. Use the UP or DOWN buttons to scroll through the 16 sound
active programs.
2. When you have found your desired sound active program press the
SET UP button to adjust the sound sensitivity. When you press SET
UP, “SJ-X” should be displayed. Use the UP or DOWN buttons to
adjust the sensitivity. “SJ-1” is the least sensitive, “SJ-8” is the
When Channel 7 is between the values of 0-51, Channels 1-4 are
used, and Channel 6 will control strobing.
When Channel 7 is between the values of 52-102, Channel 8 is in
Color Macros Mode, and Channel 6 will control strobing.
When Channel 7 is between the values of 103-153, Channel 8 is in
Color Change Mode, and Channel 6 will control the color change
speed.
When Channel 7 is between the values of 154-204, Channel 8 is
in Color Fade Mode, and Channel 6 will control the color fade
speed.
When Channel 7 is between the values of 205-255, Channel 8 is in
Sound Active Mode, and Channel 6 will control the sound sensi-
tivity.
Channel Value
Function
8 SOUND ACTIVE MODE CONT.
32 - 47 SOUND ACTIVE MODE 3
48 - 63 SOUND ACTIVE MODE 4
64 - 79 SOUND ACTIVE MODE 5
80 - 95 SOUND ACTIVE MODE 6
96 - 111 SOUND ACTIVE MODE 7
112 - 127 SOUND ACTIVE MODE 8
128 - 143 SOUND ACTIVE MODE 9
144 - 159 SOUND ACTIVE MODE 10
160 - 175 SOUND ACTIVE MODE 11
176 - 191 SOUND ACTIVE MODE 12
192 - 207 SOUND ACTIVE MODE 13
208 - 223 SOUND ACTIVE MODE 14
224 - 239 SOUND ACTIVE MODE 15
240 - 255 SOUND ACTIVE MODE 16
Flat Par QA12XS 8 Channel Mode
ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 20
