ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 9
Flat Par QA12XS Operating Instructions
UP and DOWN buttons to adjust intensity.
5. When “A.XXX” is displayed you are in Amber dimming mode. Press
the UP and DOWN buttons to adjust intensity.
6. After you have adjusted the RGBA colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the Flash (strobe) mode.
7. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as spot lights. The Flat Par QA12XS
has 8 DMX modes: 1 Channel mode, 2 Channel mode, 3 Channel mode,
4 Channel mode, 5 Channel mode, 6 Channel mode, 7 Channel mode
and a 8 Channel mode. See pages 15-20 for each modes’ DMX traits.
1. This function will allow you to control each individual fixture’s traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
“d.XXX” is displayed. “XXX” represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel
mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
To run the 1 Channel Mode, press the MODE button until “Ch.01”
is displayed. This is the 1 Channel DMX Mode.
To run the 2 Channel Mode, press the MODE button until “Ch.02”
is displayed. This is the 2 Channel DMX Mode.
To run the 3 Channel Mode, press the MODE button until “Ch.03”
is displayed. This is the 3 Channel DMX Mode.
To run the 4 Channel Mode, press the MODE button until “Ch.04”
is displayed. This is the 4 Channel DMX Mode.
To run the 5 Channel Mode, press the MODE button until “Ch.05”
is displayed. This is the 5 Channel DMX Mode.
To run the 6 Channel Mode, press the MODE button until “Ch.06”
is displayed. This is the 6 Channel DMX Mode.
To run the 7 Channel Mode, press the MODE button until “Ch.07”
is displayed. This is the 7 Channel DMX Mode.
To run the 8 Channel Mode, press the MODE button until “Ch.08”
ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 18
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
5 MASTER DIMMER
0 - 255 0% - 100%
6 STROBING/PROGRAM SPEED/
SOUND SENSITIVITY
0 - 15 STROBING OFF
16 - 255 STROBING SLOW - FAST
0 - 255 PROGRAM SPEED SLOW - FAST
0 - 31 SOUND SENSITIVITY OFF
32 - 255 SOUND SENSITIVE LEAST - MOST
7 DIMMING/STATIC COLOR SELECT/
COLOR CHANGE SELECT/
COLOR FADE SELECT
0 - 51 DIMMER MODE
52 - 102 COLOR MACRO MODE
103 - 153 COLOR CHANGE MODE
154 - 204 COLOR FADE MODE
205 - 255 SOUND ACTIVE MODE
8 COLOR MACROS & MODES
1 - 255 COLOR MACROS
(See 1 Channel DMX mode for colors)
COLOR CHANGE MODE
0 - 15 COLOR CHANGE 1
16 - 31 COLOR CHANGE 2
32 - 47 COLOR CHANGE 3
48 - 63 COLOR CHANGE 4
Flat Par QA12XS 8 Channel Mode
