START UP:
1. Connect the provided powerCON cable to the haze machine
input. Then plug the power cord into a matching power
source. There is no ON/OFF switch.
2. Primary power is now “On”.
3. 2 Seconds after power is applied the display
will show the following screen.
NOTE: There is no warm up time. The unit can operate right
away.
ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 8
ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 9
Version:
1.0
Warming
Up……
DMX set
Addr- xxx
DUR. xxx
INT. xxx
--> Dura xxx
Intv xxx
Dura xxx
--> Intv xxx
DUR. xxx
INT. xxx
(Stop)
Cleaning
DMX set
Addr- xxx
--> Vol xxx
Fan xxx
--> Vol xxx
Fan xxx
Vol xxx
--> Fan xxx
(Stop)
Cleaning
DMX set
Addr- xxx
Manual
V100 F100
DMX set
Addr- xxx
*Hold
TimeSet
DMX set
Addr- xxx
1ch.Axxx
VxxxFxxx
2ch.Axxx
VxxxFxxx
4ch.Axxx
VxxxFxxx
VxxxFxxx
DxxxIxxx
4ch.Axxx
VxxxFxxx
Entour Haze Pro
Start Up
Entour Haze Pro
Control Panel
DMX set
Addr - 1
FUNCTION BUTTON - Press this button to cycle between DMX addressing,
fan adjustment, duration adjustment, and interval adjustment. Use the UP
and DOWN buttons to make your desired adjustments.
UP BUTTON - Use this button to make adjustments to DMX addressing,
DMX channel mode, duration setting, and interval setting.
DOWN BUTTON - Use this button to make adjustments to DMX addressing,
DMX channel mode, duration setting, and interval setting.
TIMER ON/OFF BUTTON - Press this button to activate/deactivate the timer
function.
HOLD BUTTON - Press this button for continuous haze output.
MANUAL BUTTON - Press and hold this button manual haze output.
Release the button to stop haze output. This function will override any state
of operation that is currently running.