ADJ ENCORE BURST 100 IP User Instructions Download | Manualshive

Page: 15 / 22

background image

ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 14

Gamma

- In this menu you are able to make gamma corrections.

1.  Press either the MENU, UP, or DOWN buttons until “Gamma” is displayed and press ENTER.
2.  Use the UP or DOWN buttons to adjust the gamma brightness.
3.  Once you have found your desired setting press ENTER to confirm.

Tungsten

- In this menu you can activate the Tungsten Filament effect.

1. Press either the MENU, UP, or DOWN buttons until “Tungsten” is displayed and press ENTER.
2. Use the UP or DOWN buttons to toggle between “ON” and “OFF”. “ON” will activate this effect

and

“OFF” will deactivate it.

3. Once you have found your desired setting press ENTER to confirm.

Display

-

This submenu has two functions: (1). The display can be set to turn off after 20

seconds or set to stay on at all times. (2). You can set the control panel to lock after 30 seconds.

1. Press either the MENU, UP, or DOWN buttons until “Display” is displayed and press ENTER.
2. Use the UP or DOWN buttons to switch between “Backlight” and “Display Lock”. Press the

ENTER to select the setting you would like to adjust.
3. Use the UP or DOWN buttons to toggle between “ON” and “OFF” for each function.

- Backlight - “ON” will keep the display on at all times, and “OFF” will have the display turn off after

20 seconds. To “light” the display press 1 of the 4 buttons.
- Display Lock - “ON” will lock the display control after 30 seconds, and “OFF” will leave the dis

play control unlocked. To unlock the display press any 1 of the 4 buttons for at least 5 seconds.
4. Once you have found your desired settings press the ENTER button to confirm.

Service

-

With this function the unit can calibratated or reset to its default settings. The

password is “11” to access this submenu. NOTE: ONLY QUALIFIED TECHNICIANS SHOULD

PERFORM THE CALIBRATION FUNCTION.

1. Press either the MENU, UP, or DOWN buttons until “Service” is displayed and press ENTER.
2. “Pass Code” and “X” will now be displayed. “X” represents the current displayed number.
3. Use the UP and DOWN buttons to “set” the pass code and press ENTER.
4. To reset the unit to the factory settings, press the UP or DOWN buttons until “Factory Restore” is

displayed and press ENTER.

Encore Burst 100 IP

Operating Instructions

«
...
13
14
15
16
17
...
»

Summary of Contents for ENCORE BURST 100 IP























Reviews:

No comments

Related manuals for ENCORE BURST 100 IP

Brand: Fender Pages: 15

Brand: J D Squared Pages: 18

Brand: Major Pages: 52

Brand: Ultraflex Pages: 3

Implantmed SI-1010

Brand: W&H Pages: 2

Tacx Boost Bundle

Brand: Garmin Pages: 12

Brand: ABB Pages: 112

Team Agile Color Tune TM16-0

Brand: GRAU Pages: 24

Brand: LABORIE Pages: 116

Brand: Fisher Scientific Pages: 44

Haymakers Hooimakers F80-350V

Brand: Falcon Pages: 38

Brand: Lightronics Pages: 6

Brand: Neopost Pages: 10

Brand: KAM Pages: 8

Brand: Auto Meter Pages: 30

STYLEbutler 5137-0FW050

Brand: DOTLUX Pages: 12

Brand: Giorik Pages: 21

Brand: Terex Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands