ADJ DOTZ TPAR User Instructions Download Page 2

ADJ Products, LLC  -  www.adj.com  - Dotz TPar System User Manual Page 3

•  4 x COB LED Par Wash Fixtures

  1 x Foot Controller

  1 x Lighting Stand

  1 x RF Remote Control

  1 x Stand Bag

  1 x Soft Case for Lighting System

•  RGB Color Mixing

•   Strobing

•  Electronic Dimming 0-100%

•   Built in Microphone

•   DMX-512 protocol

•   Five DMX Modes: 3 Channel Mode, 5 Channel Mode, 9 Channel  

  Mode, 12 Channel Mode, & 18 Channel Mode

•   4 Operating Modes - Sound Active, Auto Run, Built-In Programs,  

  or DMX Control

•  Power Cord Daisy Chaining (See Page 21)

  Dotz TPar System 

  

        Warranty Registration

The Dotz TPar System carries a 2 year (730 days) limited warranty. 

Please fill out the enclosed warranty card to validate your purchase 

and  warranty.  You  may  also  register  your  product  online  at  www. 

americandj.com. All returned service items whether under warranty or 

not, must be freight pre-paid and accompany a return authorization 

(R.A.) number. If the unit is under warranty you must provide a copy 

of your proof of purchase invoice. Please contact ADJ Products, LLC 

customer support for a R.A. number.

  Dotz TPar System  

                                       Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations 

of  this  unit.  These  instructions  contain  important  safety  information 

regarding the use and maintenance of this unit. Please keep this manual 

with the unit, for future reference.

  Dotz TPar System                              General Instructions

  Dotz TPar System                                           Introduction

ADJ Products, LLC  -  www.adj.com  - Dotz TPar System User Manual Page 2

Unpacking: 

Thank you for purchasing the Dotz TPar System by ADJ 

Products, LLC. Every Dotz TPar System has been thoroughly tested 

and has been shipped in perfect operating condition. Carefully check 

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your fix-

ture for any damage and be sure all accessories necessary to operate 

the unit has arrived intact. In the case damage has been found or parts 

are missing, please contact our toll free customer support number for 

further instructions. Do not return this unit to your dealer without first 

contacting customer support. 

Introduction: 

The Dotz TPar System is part of ADJ’s continuing pur-

suit  for  creating  high  quality  affordable  intelligent  fixtures.  The  Dotz 

TPar System is a high performance, DMX intelligent, moving head LED 

fixture. This fixture is a great piece for retail stores, displays, mood, 

architectural, interior and exterior decoration, and clubs. This unit can 

be used as a stand alone, or in a Master/Slave configuration. The unit 

can also be controlled via DMX controller. This fixture is suitable for 

theaters, studios, retail stores, and other similar locations.

 

Customer Support:

  ADJ  Products,  LLC  provides  a  toll  free  cus-

tomer support line, to provide set up help and to answer any question 

should you encounter problems during your set up or initial operation. 

You may also visit us on the web at www.adj.com for any comments 

or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

Summary of Contents for DOTZ TPAR















Reviews: