ADJ DOT903, User Manual, Page: 11 / 22

UNIVERSAL DMX CONTROL
This function allows you to use a universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique programs tailored to your indi-
vidual needs. The Dotz Par 100 has 4 DMX channel modes; a 3 Channel Mode, 4 Channel Mode, 5
Channel Mode, & 9 Channel Mode. See the DMX Traits section of this manual for detailed informa-
tion.
• This function will allow you to control each individual fixture’s traits with a standard DMX 512
controller.
• To run your fixture in DMX mode, follow the directions in the Setup section of this manual to set
your DMX address and DMX Channel mode.
• Plug in the fixture via the XLR connections to any standard DMX controller.
• For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
11
PRIMARY-SECONDARY CONFIGURATION
This function will allow you to link up to 16 units together and operate without a controller. The
units will be sound activated. In Primary-Secondary operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit can act as a Primary or as a
Secondary.
1. Using approved DMX data cables, daisy chain your units together via the XLR connectors on the
rear of the units. Remember that the male XLR connector is the input, and the female XLR con-
nector is the output. The first unit in the chain (primary) will use the female XLR connector only,
and the last unit in the chain will use the male XLR connector only. For longter cable runs, we
suggest using a terminator on the last fixture.
2. On the Primary unit, set your desired operating mode.
3. On the secondary units press the MODE button until “SEcd” is displayed.
4. The secondary units will now follow the Primary unit.