ADJ 1227000010 User Instructions Download

Page: 4 / 32

Focus Spot 2X

Introduction

Unpacking: Thank you for purchasing the Focus Spot 2X by ADJ Products, LLC. Every unit has been

thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping

carton for damage that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are missing, please contact our toll free

customer support number for further instructions. Do not return this unit to your dealer without first

contacting customer support.
Introduction: The Focus Spot 2X is a DMX intelligent, moviing head, LED fixture. This fixture can be

used in a stand alone mode or connected in a

Primary/Secondary

configuration. This product

is intended to be used by professionally trained personnel only and is not suitable for private

use.
These instructions contain important safety information regarding the use and maintenance of
this unit. Please keep this manual with the unit, for future reference.

Customer Support: Contact ADJ Service for any product related service and support needs. Also

visit

forums.adj.com

with questions, comments or suggestions.

Parts: To purchase parts online visit:

http://parts.americandj.com

(US)

http://www.adjparts.eu

(EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-832-2941 | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 |

www.adj.com

[email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99

www.adj.eu

[email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,

doing so will void your manufactures warranty. In the unlikely event your unit may require service

please contact ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

ADJ Products, LLC - www.adj.com - Focus Spot 2X User Manual Page 3

Summary of Contents for 1227000010

































Search results

Summary of Contents for 1227000010

Reviews:

Related manuals for 1227000010

Brands by name

Popular brands

ADJ 1227000010, User Instructions

Search results

Summary of Contents for 1227000010

Reviews:

Related manuals for 1227000010

Brands by name

Popular brands