Voron 2.4 Conveyor 90 Belt Kit assembly manual
P a g e
16 | 27
Step 4.3
Mounting Heatbed
Next items from the KIT will be used:
ITEM
ITEM DESCRIPTION
Quantity
Type
1
Original Heatbed without
magnetic sheet
1
Original Part
2
Heatbed mount plate
2
Kit
3
1020 ALU PROFILE
2
Kit
4
M4x8 mm SCREW
10
Kit
5
M4 Slot nut
10
Kit
6
M5x8 mm SCREW
4
Kit
7
M5 Slot nut
4
Kit
Preparing Heatbed base plate:
Take original Heatbed, M4 knurled nuts, M3 screws and
M3 T-nuts, and mount over the 2 units 1020 ALU PROFILE as shown, heated bed has to
be centered:
Figure 26 Heatbed base plate without wheels and showing aligned holes pairs.
Installing heatbed Assembly:
Install heat bed element back again.
Proceed to insert Heated bed with support alu bars assembled, from the left side of
machine right under the tensioned BELT. (cable of heatbed will come out from the left
side to the machine and going to the electronic compartment)
