Ender 3 Belt Kit ADD-ON assembly manual
P a g e
10 | 15
Step 3.3
Getting Direct extruder ready
Next items from the KIT will be used:
ITEM
ITEM DESCRIPTION
Quantity
Origin
1
Biqu H2 V2 direct extruder
1
Printed part
2
Extruder Bracket P4
1
ADD-ON kit
3
Extruder Bracket P5
1
ADD-ON kit
4
Fan shroud
1
Printed part
5
5015 Turbo Fan
1
ADD-ON kit
6
M3x8 Screw
10
ADD-ON kit
7
M3x18 Screw
2
ADD-ON kit
8
Mk8 Nozzle (0.4, 0.6 and 0.8mm)
1 each
ADD-ON kit
Mount Biqu H2 v2 extruder with the Extruder bracket P4, using 4 units M3x8 Screw:
Figure 15 Extruder bracket with BIQU H2 V2 direct extruder
Mount supplied Hot-end fan on the heatsink side of the extruder (screws are supplied),
at this point you can install supplied 5015 TURBO FAN with printed fan shroud using 2
units M3x8 screws to the extruder, and 2 units M3x18 screws to the printed fan shroud,
also at this point you can change original nozzle with one of the extra Mk8 nozzle
supplied on the kit:
Extruder bracket p4
