
Sidewinder X1 Belt Kit assembly manual
P a g e
23 | 30
Figure 30 Belt motor assembly
Step 5.3
Installing Heatbed
Next items from the KIT will be used:
ITEM
ITEM DESCRIPTION
Quantity
Type
1
Original Heatbed with base plate
and leveling nuts and springs
1
Original Part
2
Heatbed mount plate
2
Kit
3
1020 ALU PROFILE 510mm
2
Kit
4
M4x8 mm SCREW
10
Kit
5
M4 Slot nut
10
Kit
6
M5x8 mm SCREW
4
Kit
7
M5 Slot nut
4
Kit
Preparing Heatbed base plate:
Take original Heatbed and temporarily remove heating
element, then uninstall all Vslot Wheels from it, depending on your version of your 3d
printer, holes position and quantity may vary, but they always have at least two pairs
of aligned holes, as shown in the next picture, be aware of those holes since they will
be used to fix heatbed in the next steps:
Installing support bars for heatbed:
Using
1020 ALU PROFILE 510mm
and
M5x8 Screw
(04) and
M5 Slot Nuts
(04), fix the heated base plate with the mentioned bars, as
shown in the next picture: