User Manual MIC 980
Issue 21.01.2019_01
11
2
Standby mode / Start page
As soon as the controller has been connected to a power supply, it will automatically boot up. This process
can take up to 1 minute. Then you will get to the standby screen.
On the status bar on the stand-by page you can see the current date, the current actual values, the
nominal value for pre-heating, the selected day and time for night-time pre-heating and the operating
status of the controller.
Date display
Logo
Temperature values
1. Currently measured temperature
2. Nominal temperature for pre-heating or
readiness mode, respectively
Day and time for night-time preheating
Buttons for pre-selecting and starting night
time pre-heating (see item 5)
Shortcuts and standby mode
1. Pre-selecting the air circulation level for
pre-heating and readiness mode.
Air circulation remains switched off
2. Steam flap (Item 1.4)
3. Approaching the next end position.
4. Starting readiness mode (see item 7)
5. Menu (item 3)
6. Light (item 1.4)
7. Extractor (exhaust fan) (item 1.4)
8. Starting pre-heating (see item 6)
Status bar
Status bar display
Figure 4:
Start page (Standby)
1
2
3
4
5
6
7
8
1
2
1
2
3
4
5
6
7
8
