2
5
AD
INSTRUMENTS
Chapter 2
Installation Guide
2.1 Acquisition Check
When users open the package of the device, it is necessary to check items
according to packing list. Normally it should include the following items:
•
AD-9330 Encoder with SDI Input
•
User
’
s Manual
•
Analog Audio/Video Composite Input Wire
•
AC Input Power Cord
•
Digital Audio Input Wire
•
Balance Audio Input Wire
•
Analog S Interface Input Wire
•
SD/SDI input, ASI Output, E1 Output Wire
If any item is missing or mismatch with the list above, please contact local
dealer.
2.2 Installation Preparation
When users install device, please follow the below steps. The details of
installation will be described at the rest part of this chapter. Users can also refer
rear panel chart during the installation.
The
main
content
of
this
chapter
including:
•
Checking the possible device missing or damage during the transportation
•
Preparing relevant environment for installation
•
Installing Encoder modulator
•
Connecting signal wires
•
Connecting communication port (if it is necessary)
