![background image](http://html1.mh-extra.com/html/adicos/aab-x2/aab-x2_operating-manual_3047414018.webp)
INSTALLATION
18
AAB-X22/X2
430-2410-021-EN-11
The wiring plan of the AAB-X22/X2 varies depending on system configuration and topology.
The following procedure applies for all wiring variants.
Wiring ADICOS AAB-X22/X2
1
Open enclosure cover
2
Open cable glands
3
Route cables through the cable glands into the enclosure according to Chap. 4.4
4
Connect the wires to the connection terminals according to the wiring diagram
5
Close cable glands
6
Close enclosure cover
In the case of wiring variants with more than three cables:
Installing additional cable glands
1
Open enclosure cover
2
Take the loose additional cable glands form the enclosure
3
Unscrew the blind cable glands
and
(–› Chap. 4.3) using the 25 mm open-end wrench
4
Screw the additional glands into the M20 threads and tighten watertight with a 25 mm
open-end wrench; torque:12 Nm (–› Chap. 4.3)
Summary of Contents for AAB-X2
Page 28: ......