manualshive.com logo in svg

ADIC VLS 4mm, Installation And Operating Manual, Page: 71 / 90

Share
Download
ADIC VLS 4mm Installation And Operating Manual Download Page 71

Diagnostics Menu

59

Error Counters

Provides a chronological listing (beginning with the last error issued) of the errors
encountered by the VLS system. These are VLS internal hardware/firmware errors.
This register records each error name and assigns it a sequential number.

nnnnnnnn

=

Counter name.

ccccc

=

Counter value (0 - 65535)

Event Counters

Provides a listing of the various VLS operations and how many times they have
occurred.

nnnnnnnn

=

Counter name.

ccccc

=

Counter value (0 - 65535)

Operation Log

Provides a chronological logging (beginning with the latest) of up to 255 operations.
These operations can be SCSI commands, operator requested operations, errors, and
status operations. This information can be vital for trouble shooting problems. The
following is a partial listing of some of the loggable operations. You may encounter
other operations not included here.

Summary of Contents for VLS 4mm



























































































Reviews:

No comments