ADIC VLS 4mm, Installation And Operating Manual, Page: 28 / 90

16 Equipment Description
Once your VLS has been connected to your host computer system and the software
has been installed, the VLS is ready for use. Just turn on the power switch, place a
magazine on the carriage and press
ALT and then LOAD .
Note
DXYc Yc dXU c_VdgQbU dXQd be^c dXU F<C ^_d dXU TQdQ RUY^W
dbQ^cVUbbUT d_ dXU F<C SQccUddUc Dg_ UhQ]`\Uc _V RQS[e` c_VdgQbU
QbU 3XUiU^^Uc 1B3cUbfU Q^T <UWQd_c >UdG_b[Ub
If you need to change certain operating functions, you can use the front panel buttons
(as described in the next section).
Front Panel Switches and Indicators
Switches and indicators on the front of the VLS are shown in Figure 6.
Lock
Locked
LED
Power
LED
16-Character
Display
Keypad
9,578$/ /, %5$5< 6<67(0
'5,9( $ '5,9( % (6& (17(5 32:(5
/2&.(' /2$' 81/2$' $/7 0(18
0$*$=,1(
Figure 6. Front of ADIC VLS
Lock In the locked position, you cannot access any functions of the keypad.
Display The two-line 16-character LCD shows current drive status of the VLS,
allows access to change features or displays error messages.