the same channel until the signal drops out. There is a 2 seconds delay
between signal drop-out and scan resumption to allow time for any
responding stations to begin transmitting.
Note
:
Press any other keys than [
UP
]/[
DOWN
] key to stop scanning.
Selecting Scan Resume Method
1.Press [
MENU
] key to enter menu system.
●
a menu appears on LCD display.
2.Use [
UP
]/[
DOWN
] key to select Menu No. 12(SCN MD).
3.Press [
F
] key to enter setting mode, ”
TO
” will appear on LCD.
4.Use [
UP
]/[
DOWN
] key to select
TO
or
CO
.
5.Press [
F
] key to finish setting and return to menu system.
6.Press any other key than [
LAMP
], [
UP
]/[
DOWN
] and [
F
] key to
exit menu system.
VFO Scan
VFO Scan allows you to scan all frequencies from the lowest to
the highest frequency on the band. The current frequency step
size is used.
1.In VFO mode, press [
F
]+[
3
] key to star scan.
●
Scan starts at the frequency currently displayed.
●
To reverse the scan direction, use [
UP
] (upward scan) or [
DOWN
]
(downward scan) key.
2.To quit VFO Scan, press any key other than [
LAMP
] and [
UP
]/
[
DOWN
] key.
Note
:
The Squelch function must be close before scan.
Memory Channel Scan
Memory Scan allows all memory channels to be scanned.
1.Press [
V/M
] key to enter Memory Channel mode.
2.Press [
F
]+[
3
] key to star scan.
●
Scan starts with the channel last recalled.
