Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
LoRaWAN / CANopen
Document code: MN67D20_ENG Revision 1.000 Page 18 of 33
L
O
R
A
WAN:
This section is used to define the general parameters of LoRaWAN. The means of
the fields are:
In the field “
RF Band
” the wireless band used for LoRaWAN communication
is defined;
In the field “
Network Type
” the type of LoRaWAN network is defined;
If the field “Adaptive Data Rate” is checked, the converter will enable the
ADR functionalities to select the best data rate to be used in relation to the
environmental conditions;
In the field “
Data Rate
” the data rate for LoRaWAN communication is
defined;
In the field “
Transmission Type
” the type of LoRaWAN communication is
defined;
In the field “
Max Payload Size
” the maximum dimension of the LoRaWAN
messages is defined (fixed in relation to the data rate selected);
In the field “
Activation Method
” the method used to join into a LoRaWAN
network is defined;
In the field “
Device Address
” the device identifier (DevEUI) is defined (only
for ABP method);
In the field “
Application Identifier
” the application identifier (AppEUI) is
defined (only for ABP method);
In the field “
Network Session Key
” the key used for the communication
with the LoRaWAN gateway (NwkSKey) is defined (only for ABP method);
In the field “
Application Session Key
” the key for encryption and
decryption of the payload (AppSKey) is defined (only for ABP method);
If OTAA method is selected, in the field “
Application Key
” the secret key for
the dynamic activation of the converter in the LoRAWAN network is defined.
Figure 3b: “Set Communication
LoRaWAN”
window
