ADF Web HD67C52-2-B2, User Manual

Page: 16 / 27

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual EnOcean / Modbus TCP Slave
Document code: MN67C54_ENG Revision 1.000 Page 16 of 27
SET COMMUNICATION:
By Pressing the “ Set Communication ” button from the main window for SW67C54 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for the “Modbus TCP Slave” section are:
In the fields “ IP ADDRESS ” the IP address of Modbus TCP side of the converter is
defined;
In the fields “ SUBNET Mask ” the SubNet Mask of Modbus TCP side of the converter is
defined;
In the fields “ GATEWAY ” the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field “ Port ” the port used for Modbus TCP communication is defined.
Figure 3: “Set Communication” window