ADF Web HD67B82-A1, User Manual

Page: 15 / 26

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual IEC 61850 Server / PROFINET Master
Document code: MN67B82_ENG Revision 1.000 Page 15 of 26
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, IEC 61850 and
PROFINET.
By Pressing the “
Set Communication ” button from the main window for SW67B82 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET Master” are:
In the fields “ IP Address ” the IP address for PROFINET side of the converter is
defined;
In the fields “ SubNet Mask ” the SubNet Mask for PROFINET side of the converter is
defined;
In the fields “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of
the net;
In the field " Name of Station " the name of the PROFINET node is defined.
The means of the fields for “IEC61850 Server” are:
In the field “ Port ” the port number used for IEC 61850 communication is defined;
If the field “Password ” the password used for accessing to IEC 61850 variables is
defined.
The means of the fields for “TLS (Transport Layer Security) Server” are:
If the field “ Enable TLS ” is checked, the TLS protocol for secure connection is
enabled;
In the field “ Key ” the key for the authentication is defined;
In the field “ Key Password ” the password for decrypting the key is defined;
In the field “ Server Certificate ” the certificate for the server is defined;
In the field “ Root Certificate ” the root of the server is defined;
If the field “ Enable Only Known Certificates ” is checked, the converter will accept
just connection from known Clients (defined in the section “TLS Known Certificate”).
Figure 3: “Set Communication” window