Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
OPC UA Server / CAN
Document code: MN67B33_ENG Revision 1.000 Page 16 of 27
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA
and CAN.
By Pressing the “
Set Communication
” button from the main window for SW67B33
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Server” are:
In the field “
IP Address
” the IP address for OPC UA side of the converter is
defined;
In the field “
SubNet
Mask
” the SubNet Mask for OPC UA side of the converter
is defined;
In the field “
Gateway
” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used
for going out of the net;
In the field “
DNS
” the IP Address of the DNS server is defined. This feature can
be enabled or disabled pressing the Check Box field;
In the field “
Port
” the port of OPC UA Server is defined.
The means of the fields for the “CAN” section are:
In the “
Baudrate
” field the CAN baudrate is defined.
The means of the fields for “NTP” are:
In the field “
Server URL
” the URL or the IP Address of the NTP Server is
defined;
In the field “
Poll Time (seconds)
” the polling time for the time
synchronization is defined.
Figure 3: “Set Communication” window
