ADF Web HD67B29-B2, User Manual, Page: 15 / 26

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual OPC UA Server / Modbus TCP Master
Document code: MN67B29_ENG Revision 1.000 Page 15 of 26
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA
Server and Modbus TCP.
By Pressing the “
Set Communication ” button from the main window for SW67B29 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Server” are:
In the field “ IP Address ” the IP address for OPC UA side of the converter is defined;
In the field “ SubNet Mask ” the SubNet Mask for OPC UA side of the converter is
defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field “ DNS ” the IP Address of the DNS server is defined. This feature can be
enabled or disabled pressing the Check Box field;
In the field “ Port ” the port of OPC UA Server is defined.
The means of the fields for “Modbus TCP Master” are:
In the field “ IP Address ” the IP address for Modbus TCP side of the converter is
defined;
In the field “ SubNet Mask ” the SubNet Mask for Modbus TCP side of the converter
is defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field “ TimeOut (ms) ” the maximum time that the converter attends for the
answer from the Slave interrogated is defined;
In the field “ Cyclic Delay (ms) ” the delay (idle time) between two Modbus requests
is defined.
Figure 3: “Set Communication” window