ADF Web HD67B16-B2, User Manual

Page: 15 / 32

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual OPC UA Client / EtherNet/IP Slave
Document code: MN67B16_ENG Revision 1.001 Page 15 of 32
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA Client
and EtherNet/IP.
By Pressing the “
Set Communication ” button from the main window for SW67B16 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Client” are:
In the field “ IP Address ” the IP address for OPC UA side of the converter is defined;
In the field “ SubNet Mask ” the SubNet Mask for OPC UA side of the converter is
defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field “ DNS ” the IP Address of the DNS server is defined. This feature can be
enabled or disabled pressing the Check Box field.
The means of the fields for “EtherNet/IP” are:
In the field “ IP Address ” the IP address for EtherNet/IP side of the converter is
defined;
In the field “ SubNet Mask ” the SubNet Mask for EtherNet/IP side of the converter is
defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field “ Diagnostic Port ” the port used for diagnostic features is defined;
In the fields “ Number Byte IN ” the number of input byte of the slave station is
defined;
In the fields “ Number Byte Out ” the number of output byte of the slave station is
defined.
Figure 3: “Set Communication” window