ADF Web HD67933 B2 Series, User Manual

Page: 28 / 45

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual Modbus Master / MQTT
Document code: MN67933_ENG Revision 1.101 Page 28 of 45
Figure 3k: “Set Communication  Wi-Fi” window
Figure 3l: “Set Communication  GSM / GPRS”
window
The means of the fields for Station configuration are:
In the field “ IP Address ” (OPC UA Client) the IP address for OPC UA side of
the converter is defined;
In the field “ Subnet Mask ” (OPC UA Client) the SubNet Mask for OPC UA
side of the converter is defined;
In the field “ GATEWAY ” (OPC UA Client) the default gateway of the OPC UA
net is defined. This feature can be enabled or disabled pressing the Check
Box field. This feature is used for going out of the net;
In the field “ IP Address ” (MQTT) the IP address for MQTT side of the
converter is defined;
In the field “ Subnet Mask ” (MQTT) the SubNet Mask for MQTT side of the
converter is defined;
In the field “ GATEWAY ” (MQTT) the default gateway of
the MQTT net is defined. This feature can be enabled or
disabled pressing the Check Box field. This feature is used
for going out of the net;
In the field “
SSID
” the name of the Wi-Fi network to connect is defined;
In the field “ Password ” the password used to connect to the Wi-Fi network is defined.
GSM / GPRS / LTE:
This section is used to define the parameters of mobile connection. The means of
the fields are:
In the field “ PIN ” the PIN for the SIM card (if ned) is defined;
In the field “ APN ” the APN for the mobile operator used is defined;
In the filed “ Authentication Type ” the type of authentication to the mobile
network is defined;
In the field “ Username ” the username for the authentication is defined;
In the field “ Password ” the password for the authentication is defined.