Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
IO-Link / EtherNet/IP Slave
Document code: MN67871_ENG Revision 1.000 Page 20 of 39
SET COMMUNICATION:
This section defines the fundamental communication parameters of EtherNet/IP.
By Pressing the “
Set Communication
” button from the main window for SW67871 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “IO-LINK” are:
In the fields “
Select Device
” the type of IO-LINK channels is defined;
The means of the fields for “EtherNet/IP” are:
In the fields “
IP Address
” the IP address for EtherNet/IP
side of the converter is
defined;
In the fields “
SubNet
Mask
” the SubNet Mask for EtherNet/IP
side of the converter is
defined;
In the fields “
Gateway
” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of
the net;
In the field “
Port
” the port used for EtherNet/IP
communication is defined;
In the field “
Number Bytes Input
” the number of input bytes of the converter is
defined;
In the field “
Number Bytes Output
” the number of output bytes of the converter is
defined.
Figure 3: “Set Communication” window
