ADF Web HD67661-A1, User Manual

Page: 15 / 26

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual PROFINET / EtherNet/IP Master
Document code: MN67661_ENG Revision 1.001 Page 15 of 26
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
PROFINET and EtherNet/IP.
By Pressing the “
Set Communication ” button from the main window for SW67661
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET” are:
In the fields “ IP ADDRESS ” the IP address for PROFINET side of the converter
is defined;
In the fields “ SUBNET Mask ” the SubNet Mask for PROFINET side of the
converter is defined;
In the fields “ GATEWAY ” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature is
used for going out of the net;
In the field “ Port ” the port used for PROFINET communication is defined. The
port has a fixed value of 34964.
In the field " Name of Station " the name of the PROFINET node is defined.
The means of the fields for “EtherNet/IP Master” are:
In the fields “ IP ADDRESS ” the IP address for EtherNet/IP side of the
converter is defined;
In the fields “ SUBNET Mask ” the SubNet Mask for EtherNet/IP side of the
converter is defined;
In the fields “ GATEWAY ” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature is
used for going out of the net;
In the field “ Port ” the port used for EtherNet/IP communication is defined. The
port has a fixed value of 44818.
Figure 3: “Set Communication” window