ADF Web HD67617-422-A1, User Manual

Page: 20 / 30

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual NMEA 0183 / Modbus TCP Slave - Converter
Document code: MN67617_ENG Revision 1.000 Page 20 of 30
Figure 3b: “Set Communication  Modbus TCP
Slave” window
Figure 3c: “Set Communication  RS232” window
Figure 3d: “Set Communication  RS485 / RS422”
window
M
ODBUS
TCP S
LAVE
:
This section is used to define the main parameters of Modbus TCP line. The means of
the fields are:
In the field “ IP Address ” the IP address of the converter is defined;
In the field “ SubNet Mask ” the Subnet Mask of the converter is defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used
for going out of the net;
In the field “ Port ” the TCP port to use for Modbus TCP communication is
defined.
RS232:
This section is used to define the main parameters of RS232 line. The means of the
fields are:
If the field “ Enable RS232 ” is checked, the serial port is enabled;
In the field “ Baudrate ” the baudrate for the serial line is defined;
In the field “ Parity ” the parity of the serial line is defined;
In the field “ Stop Bits ” the number of stop bits of the serial line is defined.
RS485 / RS422:
This section is used to define the main parameters of RS485 / RS422 line. The
means of the fields are:
If the field “ Enable RS485 / RS422 ” is checked, the serial port is enabled;
In the field “ Baudrate ” the baudrate for the serial line is defined;
In the field “ Parity ” the parity of the serial line is defined;
In the field “ Stop Bits ” the number of stop bits of the serial line is defined.