Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFINET / SNMP Agent
Document code: MN67613_ENG Revision 1.100 Page 22 of 28
Writing PROFINET data from SNMP
:
In order to write the data from the HD67613, it is necessary to use the SET command.
Each OID defined in the section “Set SNMP Access -> SNMP Write” will be placed in the MIB tree of the converter.
In addition, it will be possible to write the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.
