Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual
PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG
Revision 1.001 Page 8 of 33
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip2 of ‘Dip-Switch A’:
The first, with Dip2 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip2 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updating (see ‘UPDATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).
Warning:
Dip1 of ‘Dip-Switch A’ must be at ON position for working even if the Ethernet cable isn’t inserted.
