ADF Web HD67604-A1, User Manual

Page: 19 / 33

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG Revision 1.001 Page 19 of 33
By pressing the “ Manual Module ” button from the “PROFIBUS Device” window (Fig. 6) the “Add Module Manually” window appears (Fig. 8).
In this window is possible to add a Module manually, i.e. writing the configuration of the module (in hexadecimal).
The means of the fields are:
In the field “ Description of Module ” a name of the Module is defined;
In the field “ Insert the Configuration of Module (HEX) ” the
configuration of the module is defined. The configuration must be write
in hexadecimal mode (without prefix “0x” o “$”).
To modify a Module inserted manually, is neccessary to do a double click on
the module to change in the “Select Module” list (Fig. 7, point (1)). It is
possible to change only the module inserted manually.
Note:
The Values inserted in the table must between 00 and FF
Figure 8: “Add/Modify Module Manually” window