Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
J1939 / CAN - Converter
Document code: MN67439_ENG Revision 1.101 Page 24 of 33
Page 24 of 33
UPDATE DEVICE USB:
By pressing the “
Update Device USB
” button it is possible to load the created Configuration into the device, and also the Firmware if is
necessary, using the USB port.
In order to load the parameters or update the firmware in the device, follow these
instructions:
Connect the USB cable from your PC to the Converter;
Select the “
COM port
”;
Select which operations you want to do.
Press the “
Execute update firmware
” button to start the upload;
When all the operations are “OK”, disconnect the USB cable;
At this point the configuration/firmware on the device is correctly update.
Figure 11: “Update Device” windows
