![background image](http://html1.mh-extra.com/html/adexa/phw-3000r/phw-3000r_user-manual_2850880005.webp)
⚫
Take out the front grid to clean the reflector (reflecting mirror) and the filament and
apply the instructions on page 19.
D-Repair and Service (page 20)
⚫
Attention! Only technical services and persons authorized by SUN may serve, repair
and replace the parts of this heater.
Distinguished Customer:
Please read safety instructions carefully for the security of you, your family and your
belongings before operating your appliance.
3. Installation
3.1 Installation Instructions
①
There are 4 brackets and fasteners used with the heater. Furthermore, in the
canal of back side of the heater there are 4 square fastener washers 25×25mm.
Relieve square washers(Figure 7.1)and fasten 2 brackets to the
canal of the backside of the heater by the help of screws(Figure 7.2.)
②
Fasten the brackets at the appropriate distance of each other(45-55cm)
(Figure 8).
③
Two other brackets are fastened by the help of fasteners at the
appropriate