Safety Recommendations and Advices
These instructions are valid if only country code seen on appliance.
If country code does not exist on appliance, please refer to valid technical
documents in order to arrange appliance in accordance with the technical
requirements of the country of use.
Mounting and Connection
➢
Make electric connection of your equipment in compliance with EN 60335-1 and
EN 60335-2-38.
➢
Ground your equipment in compliance with EN 60335-1
standards and ensure maintenance of the grounding.
➢
Electric safety of the equipment may be ensured only by means of protected
cable system in accordance with the rules. It is very important to perform this
essential safety measure. If you are suspicious, you have the installation
controlled by a professional electrician. The manufacturing firm is not
responsible for any damages that may arise from a missing or broken fuse
cable.
➢
When performing electric connection of the equipment, never use an extension
cable. Equipment safety cannot be realized with extension cable.
➢
Do not use your equipment in multi-plug socket media.
➢
Before installation of your equipment, make sure that there is no visible
damage. Do not install or use any damaged equipment.
➢
Before connection of your equipment, make sure that the data on the
manufacturer’s plate comply with the specifications of mains (insurance,
voltage and frequency) you use. If you hesitate, please consult a qualified
electrician.
➢
If the main cord is damaged, it must be replaced by
ADEXA
; a service center
authorised by ADEXA or similarly qualified persons in order to avoid a hazard.
➢
Defective parts may only be replaced by original
ADEXA
spare parts. We as
manufacturer may only assure that you shall operate your equipment with these
parts completely in safe.
➢
The manufacturing firm is not responsible for any damages that maybe caused by
improper mounting or connection of the equipment.
Rules of Operation
➢
Please read carefully the Operation Manual before first operation. Thus you shall
both protect yourself and prevent the equipment from being damaged.
➢
Use the equipment only in mounted state. Thus you will avoid of contact with
electric-conducting parts of the equipment.
➢
Use the equipment only on a flat surface.
➢
Use the equipment only for grilling Doner Kebab meat. The manufacturing firm
is not responsible for any defect or damage arising from use of the equipment for
any other purpose.
5
